Index
Prev
Index
1/4-inch tape drive
preventive maintenance
150 MB Tape Drive Preventive Maintenance
4-mm DAT drive. See DAT drive.
Cleaning the 4-mm DAT and 8-mm Tape Drives
64bit RISC microprocessors
in system
The Challenge Board Set
8 mm tape drive
cleaning
Cleaning the 4-mm DAT and 8-mm Tape Drives
front panel lights
Front Panel Lights
removing jammed cassettes
Removing a Jammed 8-mm Tape Cartridge
8-mm tape drive, cleaning of
Care and Cleaning of the Exabyte 8-mm Tape Drive
Adding SCSI devices
rules for
SCSI Configuration
additional Ethernet port
SCSI Limitations
additional parallel port
Parallel Printer Ports
additional serial ports
Enabling Additional Serial Ports
address (ID)
of a SCSI device
Installing and Configuring Additional FLDs
adjustment steps
for your work area
Adjusting Your Chair, Work Surface, and Monitor
airflow
Cooling System
American National Standard Institute
ANSI Standard for VDT Workstations
ASCII terminal
cable pin assignments
Connecting an ASCII Terminal
connect an optional
Connecting an ASCII Terminal
backups for the system
Software Do's and Don'ts
behavior
faulty operation
System Behavior
of the system
System Behavior
boot process
monitored from the System Controller
The Power-On Process
Boot Status menu
Boot Status Menu
bus request levels
VMECC
cartridge tape identification labels
DLT Tape Cartridge Care and Handling
CD-ROM
loading software
Installing and Using an Optional CD-ROM
CD-ROM drive
front panel features
CD-ROM Front Panel Operational Features
CD-ROM drives
care and maintenance
CD-ROM Care and Maintenance
clean the 8-mm tape drive, instructions
Care and Cleaning of the Exabyte 8-mm Tape Drive
cleaning cartridge
end-of-life
Care and Cleaning of the Exabyte 8-mm Tape Drive
for 8-mm tape drive
Care and Cleaning of the Exabyte 8-mm Tape Drive
use of
Digital Linear Tape Maintenance
cleaning cycle
Loading a Cleaning Cartridge
cleaning materials, 8-mm tape drive
Care and Cleaning of the Exabyte 8-mm Tape Drive
compact disc
environmental considerations
CD-ROM Environmental Considerations
Cooling System
Cooling System
CPU activity display
The CPU Activity Display
CPU activity graph
Using the System Controller
DAT drive
capacities
Archive Python 4320 NT (4 mm DAT Drive)
cleaning
Cleaning the 4-mm DAT and 8-mm Tape Drives
data transfer rate
Archive Python 4320 NT (4 mm DAT Drive)
front panel lights
Front Panel Lights
loading and unloading cassettes
Loading and Unloading Cassettes
removing jammed cassettes
Removing a Jammed 4-mm Cassette
data compression
Digital Linear Tape Maintenance
daughter boards. See mezzanine or mezz boards
SCSI Limitations
defective microprocessors
The Power-On Process
differential SCSI
SCSI Configuration
disk controllers
SCSI-2 Interface
DLT cartridge care and handling
DLT Tape Cartridge Care and Handling
DLT cleaning cartridge
Digital Linear Tape Maintenance
DLT tape jam
Removing a Jammed Tape Cartridge
documentation
conventions
Conventions
drive sled
mounting to drive
Installing a Half-Height FLD
Ebus
Main System Bus
Features and Options
electrostatic discharge (ESD)
Electrostatic Discharge
EMI shield
installing
Installing a Half-Height FLD
enable an additional Ethernet port
SCSI Limitations
enable the additional serial ports
Enabling Additional Serial Ports
ergonomic work environment
Tips for Setting Up and Using Your Workstation
Ethernet
optional connections
SCSI Limitations
Ethernet Interface
Ethernet Interface
SCSI Limitations
external appearance of the chassis
Touring the Chassis
external SCSI connector
Installing External SCSI Devices
Extreme
The I/O Panel
Extreme graphics
The I/O Panel
fans
Cooling System
fault LED
on System Controller
The Power-On Process
FCI interfaces
Flat Cable Interface
front door
opening of
Opening the Front Door
front loading device
installing a full-height
Installing a Full-Height FLD
removal of
Removing an FLD
front loading devices
configuring
Installing and Configuring Additional FLDs
overview
Internal Front-Loading Drives
front-loading SCSI device
installing
SCSI Configuration
full-height front loading device
installing
Installing a Full-Height FLD
guidelines
for a productive work environment
Human Factors Guidelines for Setting Up Your Workstation
half-height front loading device
installing
Installing a Half-Height FLD
hardware
do's and don'ts
Maintaining Your Hardware and Software
maintenance of
Hardware Do's and Don'ts
histogram
The CPU Activity Display
I/O panel
accessing
Opening the Front Door
Ibus
I/O Interfaces
Ibus
interfaces
Ibus Interface
information options
on the System Controller
System Controller On Functions
installing devices
front loading SCSI device
SCSI Configuration
IO4
list of features
I/O Interfaces
IO4 mezzanine daughter boards
Features and Options
IP21 CPU board
Features and Options
jammed tape
Removing a Jammed Tape Cartridge
key switch
location of
Rebooting Your System
on the System Controller
System Controller On Functions
logged errors
in System Controller
Using the System Controller
maintenance
Getting Started
Maintaining Your Hardware and Software
Mezzanine Boards
VMEbus Channel Adapter Module (VCAM) Board
microprocessors disabled
The Power-On Process
modem
cable pin assignments
Connecting a Modem
connection of
Connecting a Modem
noise
on the SCSI bus
Installing and Configuring Additional FLDs
NVRAM
System Controller On Functions
NVRAM log file
The Event History Log Menu
Off-line switcher (OLS)
Power Supplies
opening the front door
Opening the Front Door
operating protocols
of drives
Internal Front-Loading Drives
optional installed IO4
SCSI Limitations
optional IO4
Enabling Additional Serial Ports
options
list of
Features and Options
OVER TEMP condition
Using the System Controller
parallel port
Parallel Port
parallel printer
connection of
Connecting a Parallel Printer
pin assignments
Connecting a Parallel Printer
using the LP spooling system
Connecting a Parallel Printer
parallel printer port
Parallel Printer Ports
physical inspection
checklist
System Behavior
physical location
requirements
Operating Considerations
power boards
Using the System Controller
power receptacle
Power Supplies
power specifications
Hardware Specifications
power-on diagnostic
Powering On the Challenge Deskside System
POWERchannel-2
Features and Options
Powered peripherals
Serial and DIN Connectors
POWERpath-2 interleaved memory board. See MC3.
The Challenge Board Set
POWERpath-2 system bus
Features and Options
R8000 microprocessor
Features and Options
Features and Options
Features and Options
Features and Options
ranges of adjustment
in the work environment
CAD Operator Preferences
reboot
command
Rebooting Your System
restoring system software
Recovering From a System Crash
rotary blower. See Cooling System.
Cooling System
RS-232 standard
Serial and DIN Connectors
SCSI
fast and wide
SCSI Configuration
terminators
SCSI Configuration
SCSI bus
malfunction
SCSI Configuration
SCSI cable length
SCSI Limitations
SCSI channel
A or B
Installing and Configuring Additional FLDs
SCSI devices
rules for adding
SCSI Configuration
SCSI drive backplane
termination of
SCSI Limitations
SCSI drive rack
location of
SCSI Drive Rack
SCSI drives
supported devices
SCSI I/O Devices
SCSI protocols
SCSI Configuration
SCSI-2 controllers
SCSI-2 Interface
serial ports
Serial Ports
commands and configuration
Helpful Serial Port Commands
serial printer
connection
Connecting a Serial Printer
LP spooling
Connecting a Serial Printer
setup example
Connecting a Serial Printer
shut down
system software
Powering Off the Challenge Deskside System
shutdown
procedure
Powering Off the Challenge Deskside System
sled board settings
for SCSI devices
Installing and Configuring Additional FLDs
software
do's and don'ts
Software Do's and Don'ts
maintenance of
Software Do's and Don'ts
specifications
physical, electrical, and environmental
Hardware Specifications
standard I/O interface connectors
The I/O Panel
status messages
The Power-On Process
system behavior
identifying problems
System Behavior
System Controller
basic operation
Using the System Controller
battery backup
System Controller
bringing up the system
The Power-On Process
control buttons
System Controller On Functions
detection of a fault condition
System Controller On Functions
errors recorded
System Controller On Functions
event history message tables
System Controller Messages
front panel location
System Controller
general description
System Controller
hang during power up
If the System Hangs
LEDs
System Controller On Functions
On position functions
System Controller On Functions
power up hang
If the System Hangs
System Controller internal errors
The Event History Log Menu
system crash
recovery from
Recovering From a System Crash
System error messages
The Event History Log Menu
System events
The Event History Log Menu
tape cartridge jam
Removing a Jammed Tape Cartridge
Terminal
connection of optional ASCII device
Connecting an ASCII Terminal
unload button, on tape drive
Care and Cleaning of the Exabyte 8-mm Tape Drive
user-serviceable parts
Getting Started
using the keyboard
System Usage
VCAM
VMEbus Channel Adapter Module (VCAM) Board
VCAM Boards
VMEbus Channel Adapter Module (VCAM) Board
VDT Workstation Adjustment
ANSI Standard for VDT Workstations
versa modular European
VMEbus Implementation
VME
board power budget
Power Supplies
VME cache controller
VMECC
VME expansion slots
System and SCSI Backplanes
VME Interface
description of
VMEbus Interface
VME power
Power Supplies
VMECC
VMECC
VMECC
work environment
comfort and safety of
Human Factors Guidelines for Setting Up Your Workstation