List of Figures

| Table of Contents | List of Figures | List of Tables |

Figure 1-1. Turning Off the Front Power Switch

Figure 1-2. Removing the Plastic End Caps

Figure 1-3. Removing the Chassis From the Rack

Figure 1-4. Chassis on a Work Surface

Figure 1-5. Removing the System Cover

Figure 1-6. Removing the Chassis Access Cover (CPU Module)

Figure 1-7. Removing the Chassis Access Cover (GIGAchannel Expansion Cabinet)

Figure 1-8. Attaching a Grounding Wrist Strap to the Chassis (CPU Module Shown)

Figure 2-1. Locating the PCI Option Slots

Figure 2-2. Removing a PCI Slot Blanking Plate

Figure 2-3. Example PCI Board With Feature Connectors

Figure 2-4. Attaching a Feature Connector Cable to the PCI Backplane

Figure 2-5. Attaching a Feature Connector Cable to the PCI Board

Figure 2-6. Securing the PCI Option Board to the Chassis

Figure 2-7. Location of PCI Slots in a GIGAchannel Expansion Cabinet

Figure 2-8. Removing the Blanking Plate From a GIGAchannel Expansion Cabinet

Figure 2-9. Installing a PCI Option Board in a GIGAchannel Expansion Cabinet

Figure 2-10. Removing a PCI Option Screw and Board

Figure 2-11. Replacing a PCI Option Board Blanking Plate and Screw

Figure 2-12. Removing a PCI Board From a GIGAchannel Expansion Cabinet

Figure 2-13. Replacing the PCI Blanking Plate in a GIGAchannel Expansion Cabinet

Figure 2-14. Loosening the XIO Board Retaining Plate

Figure 2-15. Sliding the Retaining Plate Aside

Figure 2-16. Removing an XIO Slot Blanking Card

Figure 2-17. Installing an XIO Board

Figure 2-18. Sliding the XIO Board Retaining Plate Over the XIO Slots

Figure 2-19. Tightening the XIO Retaining Plate Screws

Figure 2-20. Loosening the XIO Board Retaining Plate

Figure 2-21. Sliding the XIO Board Retaining Plate Aside

Figure 2-22. Removing an XIO Board From a GIGAchannel Expansion Cabinet

Figure 2-23. Installing an XIO Blanking Card in a GIGAchannel Expansion Cabinet

Figure 2-24. Sliding the XIO Board Retaining Plate Over the XIO Slots

Figure 2-25. Tightening the XIO Retaining Plate Screws

Figure 3-1. Locating DIMMs in the Origin200 Server

Figure 3-2. DIMM Pair Grouping in the Origin200 Server

Figure 3-3. Installing a DIMM

Figure 3-4. Locating DIMMs in an Origin200 Server

Figure 3-5. DIMM Pair Grouping in the Origin200 Server

Figure 3-6. Removing DIMMs

Figure 4-1. Location of the GIGAchannel Expansion Cabinet Status LED

Figure 4-2. Location of the GIGAchannel Diagnostic LEDs

Figure 4-3. Viewing and Interpreting the GIGAchannel Diagnostic LEDs

Figure 4-4. Location of Crosstown (XIO) Status LEDs

Figure 4-5. Ethernet 10-Base-T/100-Base-TX Port LEDs

Figure 4-6. Compression Connector Used on XIO Boards

Figure 4-7. Position for Compressed Air Can When Cleaning Compression Connector

Figure 5-1. Cable Connections and Spring Clips on the SCSI Backplane

Figure 5-2. Disconnecting a Fan and Fan Power Cable (Some Components Not Shown For Clarity)

Figure 5-3. Removing a Fan From the System (Some Components Not Shown For Clarity)

Figure 5-4. Unfastening the PCI Plenum Divider Sheetmetal

Figure 5-5. Removing the PCI Plenum Divider

Figure 5-6. Disconnecting Cables From the Logic Carrier

Figure 5-7. Unfastening the Logic Carrier

Figure 5-8. Removing the Logic Carrier

Figure 5-9. Lowering a Logic Carrier Into the System

Figure 5-10. Fastening the Logic Carrier

Figure 5-11. Attaching the Logic Carrier Cables

Figure 5-12. Installing the PCI Plenum Divider

Figure 5-13. Fastening the PCI Plenum Divider

Figure 5-14. Removing the Origin200 Power Supply Screws

Figure 5-15. Removing the Origin200 Server Power Supply

Figure 5-16. Replacing the Origin200 Server Power Supply Screws

Figure 5-17. Removing the Front Bezel Crossbar

Figure 5-18. Removing the System Controller Assembly From the Chassis

Figure 5-19. Removing the Module System Controller Board From Its Carrier

Figure 5-20. Removing the NIC From the Module System Controller

Figure 5-21. Unfastening the Power Supply Shroud

Figure 5-22. Lifting the Power Supply Shroud From the GIGAchannel Chassis

Figure 5-23. Unplugging the Blower Power Connector

Figure 5-24. Removing the Blower Cover

Figure 5-25. Removing the Blower from the GIGAchannel Cabinet

Figure 5-26. Replacing the Blower

Figure 5-27. Reattaching the Blower Power Cable

Figure 5-28. Replacing the Blower Cover

Figure 5-29. Removing the Power Supply Shroud Screws

Figure 5-30. Removing the Power Supply Shroud

Figure 5-31. Disconnecting the Power Cord Extension

Figure 5-32. Removing the GIGAchannel PCI Backplane

Figure 5-33. Replacing the PCI Backplane

Figure 5-34. Removing the Blower Cover

Figure 5-35. Removing the Power Supply Shroud Screws

Figure 5-36. Removing the Power Supply Shroud

Figure 5-37. Unfastening the Midplane Captive Screws

Figure 5-38. Lifting the Midplane out of the GIGAchannel Chassis

Figure 5-39. Installing a Midplane in a GIGAchannel Chassis

Figure 5-40. Midplane Captive Screws

Figure 5-41. Location of the Crosstown Board and Captive Fasteners

Figure 5-42. Removing the Crosstown Board

Figure 5-43. Location of the Fuse Cover in the GIGAchannel Expansion Chassis

Figure 5-44. Removing the Fuse Cover From a GIGAchannel Expansion Chassis