List of Figures

| Table of Contents | List of Figures | List of Tables |

Figure 1-1. Sirius Video Top-Level Block Diagram

Figure 1-2. Sirius Video Board Architecture

Figure 1-3. Sirius Video Board Quadrants

Figure 2-1. Simple VL Path

Figure 2-2. VL Blending

Figure 2-3. Sirius Video Source and Drain Nodes

Figure 3-1. Chroma Key Generator Controls

Figure 3-2. Value, Range, and Softness for a Channel

Figure 3-3. Setting Blender Function Values

Figure 3-4. Chroma Keying Application

Figure 3-5. Sirius Video Blend Node

Figure 4-1. GPI Port on Sirius Video Breakout Box

Figure 4-2. Device Synchronization Input Controls

Figure 4-3. GPI Interface Pinouts

Figure A-1. Input Filter Frequency Response

Figure A-2. K-Factor Measurements

Figure A-3. Input Genlock S/N Ratio and Crosstalk

Figure A-4. Composite In—Composite Out: TSG-100 Sweep Input, Color Mode on Decoder

Figure A-5. Composite In—Composite Out: Decoded and Encoded 75% Color Bars

Figure A-6. Composite In—Composite Out: Decoded and Encoded 75% Color Bars

Figure A-7. Composite In—Composite Out: S/N Ratio

Figure A-8. Output Filter Frequency Response with SinX/X Compensation

Figure A-9. Response under +-0.25 dB Ripple Conditions

Figure A-10. Typical Waveform, Example 1

Figure A-11. Typical Waveform, Example 2

Figure A-12. Typical Waveform, Example 3

Figure A-13. Typical Waveform, Example 4

Figure A-14. Typical Waveform, Example 5

Figure A-15. Typical Waveform, Example 6

Figure A-16. Composite In—Composite Out: S/N Ratio

Figure A-17. Vector Display, Digital Color Bars

Figure A-18. S/N Ratio, Digital Color Bars

Figure A-19. Output Timing, Green Versus Red

Figure A-20. Output Timing, Green Versus Blue

Figure A-21. Sirius Video Breakout Box

Figure B-1. Example Configuration: Sirius Video GPI Port, Switch Closure Mode

Figure B-2. Example Configuration: Sirius Video GPI Output to Abekas A65/A66 Input

Figure C-1. Digital Video Input Ports for Single-Link Mode

Figure C-2. Digital Video Input Ports for Dual-Link Mode

Figure C-3. Selecting Digital Input Video Format in vcp

Figure C-4. Digital Video Source Signal Controls

Figure C-5. Analog Input Ports on the Sirius Video Breakout Box

Figure C-6. Selecting Analog Input Video Format in vcp

Figure C-7. Selecting Input Genlock Sync

Figure C-8. Genlock Sync Menu Choices and Breakout Box Sockets

Figure C-9. Setting Genlock Voltage Level

Figure C-10. Setting Analog Video Source Field Dominance or Horizontal Phase

Figure C-11. Fields and Frames for NTSC and PAL

Figure C-12. Adjusting Gain and Offset for Component Video

Figure C-13. Adjusting Attributes for Composite Video

Figure C-14. External Sync Input Port on the Sirius Video Breakout Box

Figure C-15. Selecting Genlock Sync Source

Figure C-16. Setting Genlock Voltage Level

Figure C-17. Output Ports on the Sirius Video Breakout Box

Figure C-18. Selecting Video Drain Format

Figure C-19. Selecting Output Genlock Sync

Figure C-20. Adjusting Drain Horizontal Phase

Figure C-21. Adjusting Gain for Component Video Drain

Figure C-22. Adjusting Graphics Source Timing

Figure C-23. Adjusting Graphics Drain Timing

Figure C-24. Adjusting Texture Drain Timing

Figure D-1. RGB Cube in CCIR Space

Figure D-2. Color Cube With Luminance/Chrominance Ramp Vector

Figure D-3. 100% Color Bars: Cr/R

Figure D-4. 100% Color Bars: Y/G

Figure D-5. 100% Color Bars: Cb/B

Figure D-6. Luminance Ramp: Cr/R

Figure D-7. Luminance Ramp: Y/G

Figure D-8. Luminance Ramp: Cb/B

Figure D-9. Chroma/Luma Ramp: Cr/R

Figure D-10. Chroma/Luma Ramp: Y/G

Figure D-11. Chroma/Luma Ramp: Cb/B