List of Tables

| Table of Contents | List of Figures | List of Tables |

Table 2-1. Main I/O Panel Connector Descriptions

Table 2-2. InfiniteReality Graphics Connectors

Table 2-3. RE2 or VTX Graphics I/O Panel Connector Descriptions

Table 2-4. Cardcage 2 and 3 I/O Panel Connector Descriptions

Table 2-5. Parallel Port Connector Pin Assignments

Table 3-1. 21-Inch Front-Panel Monitor Controls

Table 3-2. Preset Viewing Modes for the 21-Inch Monitor

Table 3-3. System Controller Boot Status Messages

Table 3-4. Options on the Controls Menu

Table 3-5. Options on the Options Menu

Table 4-1. 68-Pin Single-Ended, High-Density SCSI Pinouts

Table 4-2. 68-Pin Differential, High-Density SCSI Pinouts

Table 4-3. Typical Null Modem Connector Pin Assignments

Table 4-4. Parallel Printer Connector Pin Assignments

Table 4-5. RS-232 Modem Connector Pin Assignments

Table 5-1. Boot Status Menu Messages

Table 6-1. ANSI/HFS 100 Guidelines for VDT Workplace Adjustment (1988)

Table 6-2. Adjustments Preferred by CAD Users

Table A-1. Onyx Rackmount Graphics Workstation Specifications

Table A-2. Onyx 21-Inch Monitor Specifications

Table B-1. 4-mm DAT Front Panel LED Status Indicators

Table B-2. LED States and Interpretations

Table C-1. Power-On Errors and Fault Identification

Table C-2. System Error Messages

Table C-3. System Event Messages

Table C-4. Internal System Controller Error Messages

Table D-1. Optional Mezzanine Board Descriptions

Table E-1. Supported Address and Data Sizes

Table E-2. Word Length Conventions

Table E-3. CC1 and CC2 InfiniteReality Maximum Configuration Examples

Table E-4. InfiniteReality CC3 VME Power Availability

Table E-5. System Maximum (12 RM6s) Board Configuration

Table E-6. System Maximum (10 RM6s) Board Configuration

Table E-7. System Maximum (8 RM6s) Board Configuration

Table E-8. Two-Pipe System Maximum (8 RM6s) Board Configuration

Table E-9. P1 VME Pin Assignments

Table E-10. P2 VME Pin Assignments

Table E-11. P3 VME Pin Assignments

Table E-12. Signal Definitions

Table E-13. Correspondence of VME Jumpers to VME Slots