- ? command
- Getting Help in the Command Monitor
- Access Control Lists
- Access
Control
Lists (ACLs) and Capabilities
- access permissions
- Changing File and Directory Access Permission
- Default File Permissions (umask)
- account administration
- User Account Administration
- account passwords
- Account Passwords
- ACL
- Access
Control
Lists (ACLs) and Capabilities
- administration system overview
- Administration Tools Overview
- administrative partitions
- Changing
Processor Assignment on Multiprocessor Systems
- application tuning
- Application Tuning
- archiving
- File Compression and Archiving
- archshinv command
- Summary of Command Monitor Commands
- ARCS PROM systems
- PROM Monitor
- array command
- Process Monitoring on an Array
- ASCII character set
- ASCII Conversion Table
- asmachid parameter
- Extended Accounting Parameters
- asmachid
- at command
- Task Scheduling with the at, batch, and cron Commands
- auto command
- Summary of Command Monitor Commands
- Booting the Default File with the auto Command
- autoconfig command
- Creating and Booting a New Kernel with autoconfig
- AutoLoad variable
- Command Monitor Environment Variables
- automating tasks
- Task Scheduling with the at, batch, and cron Commands
- automount command
- Checking Software Configuration Options with chkconfig
- Booting across a Larger Network
- autopower variable
- Command Monitor Environment Variables
- autoup parameter
- bdflushr
- autoup
- availability monitor
- availmon, the System Availability Monitoring Tool
- availmon system
- availmon, the System Availability Monitoring Tool
- backup
- Backing Up the System
- batch command
- Task Scheduling with the at, batch, and cron Commands
- bdevsw_extra parameter
- Loadable Drivers Parameters
- bdevsw_extra
- bdflush_interval parameter
- bdflush_interval
- bdflushr parameter
-
Paging Parameters
- bdflushr
- Berkeley remote shell
- Login Shells
- bibliography
-
Bibliography and Suggested Reading
- /bin/csh shell
- Login Shells
- /bin/rsh shell
- Login Shells
- /bin/sh shell
- Login Shells
- block transfer engine
- Networking Setup between Partitions
- boot command
- Summary of Command Monitor Commands
- Booting a Specific Program with the boot Command
- Booting the Standalone Shell
- bootp Protocol
- Booting across a Larger Network
- boot environment
- Using the Command (PROM) Monitor
- bootfile variable
- Command Monitor Environment Variables
- booting
- bootp
- bootp Protocol
- command
- Booting a Specific Program with the boot Command
- command monitor
- Booting a Program from the Command Monitor
- default file
- Booting the Default File with the auto Command
- disks and other devices
- Booting from a Disk or Other Device
- gateways
- bootp Protocol
- specific program
- Booting a Specific Program with the boot Command
- bootmode variable
- Command Monitor Environment Variables
- bootp command
- bootp Protocol
- Network Bootup Issues
- boottune variable
- Command Monitor Environment Variables
- Bourne shell
- description
- Bourne Shell
- Login Shells
- startup files
- Bourne and Korn Shell Configuration Files
- brk system call
- Checking Available Memory
- broadcast message (/etc/wall )
- System Unavailability Notification
- bsh command
- Login Shells
- BTE
- Networking Setup between Partitions
- buf_relse_age parameter
-
General Parameters
- buf_relse_age
- buffer cache
- nbuf
- cachefs_max_threads parameter
-
General Parameters
- cachefs_max_threads
- cachefs_readahead parameter
-
General Parameters
- cachefs_readahead
- callout_himark parameter
-
General Parameters
- callout_himark
- C-bricks
- Supported Configurations
- Partitioning Guidelines
- cd command
- Using find and cpio to Locate and Copy Files
- cdevsw_extra parameter
- Loadable Drivers Parameters
- cdevsw_extra
- checkpoint and restart
- Checkpoint and Restart
- chgrp command
- Recursive Commands
- Recursive Commands
- Changing a User's Group
- chkconfig command
- Checking Software Configuration Options with chkconfig
- Using sar
- Time and Date Messages
- Swapping and Paging Messages
- chmod command
- Locating Files with the find Command
- User Privacy
- Scheduling Tasks with the at Command
- Changing File and Directory Access Permission
- Increasing Swap Space on a Multidisk System
- chown command
- Recursive Commands
- chown system call
- Switch Parameters
- restricted_chown
- chproj command
- Project ID Numbers
- clock issues
- System Off Message
- coalescing
- Tunable Parameters for
Coalescing
- colors, selecting
- Creating a
Custom Shell Window
- colorview command
- Creating a
Custom Shell Window
- command (PROM) monitor programs
- Using the Command (PROM) Monitor
- command history
- C Shell Shortcuts
- command monitor
- booting
- Booting a Program from the Command Monitor
- changing variables
- Changing Command Monitor Environment Variables
- command line editor
-
Command Monitor Command Syntax
- command summary
- Summary of Command Monitor Commands
- device names
- Device Names in the Command Monitor
- entering
- Entering the Command (PROM) Monitor
- environment variables
- Command Monitor Environment Variables
- file syntax
- Command Monitor Filename Syntax
- keyboard variables
- Setting the Keyboard Variable
- reinitializing
- Reinitializing the Processor from the Command Monitor
- commands
- aliasing
- C Shell Shortcuts
- monitor
- Summary of Command Monitor Commands
- recursive
- Recursive Commands
- syntax
-
Command Monitor Command Syntax
- tools
- Administration Tools Overview
- comment fields
- Changing a User's Default Shell
- configuration file
- Configuring the IRIX Operating System
- Configuration File
- console diagnostics
- Starting the System
- console variable
- Command Monitor Environment Variables
- ConsoleIn variable
- Command Monitor Environment Variables
- ConsoleOut variable
- Command Monitor Environment Variables
- ConsolePath variable
- Partitioning Guidelines
- Core file permissions
- coremask
- coremask
- coremask
- corepluspid parameter
- Switch Parameters
- corepluspid
- cp command
- Creating and Booting a New Kernel with autoconfig
- cpio command
- Using find and cpio to Locate and Copy Files
- Deleting a User from the System
- cpr command
- Checkpoint and Restart
- CPU action parameters
- CPU Action Parameter
- CPU time limit
- cpulimit_gracetime
- CPU-bound systems
- Checking the CPU
- CPU-intensive processes
- Monitoring User Processes
- Prioritizing Processes
- cpulimit_gracetime parameter
-
Resource Limits Parameters
- cpulimit_gracetime
- cpusets
- Changing
Processor Assignment on Multiprocessor Systems
- Defining and Managing Cpusets
- cron command
- Task Scheduling with the at, batch, and cron Commands
- IRIX Operating System
Run Levels (System State)
- crontab command
- Task Scheduling with the at, batch, and cron Commands
- csh command
- Creating a
Custom Shell Window
- Prioritizing Processes with nice
- C-shell
- description
- Login Shells
- shortcuts
- C Shell Shortcuts
- startup files
- C Shell Configuration Files
- .cshrc file
- Setting Permissions with umask
- User Environment
- custom shell windows
- Creating a
Custom Shell Window
- customization software
- Configuring Software
- cwcluster parameter
- cwcluster
- DAC
- Setting Permissions with umask
- daemons
- Checking Software Configuration Options with chkconfig
- DARPA standard protocol
- bootp Protocol
- date and time
- Changing the System Date and Time
- date command
- Summary of Command Monitor Commands
- Time and Date Messages
- dbaud variable
- Command Monitor Environment Variables
- dbgname variable
- Command Monitor Environment Variables
- dbgtty variable
- Command Monitor Environment Variables
- dedicated swap space
- Increasing Swap Space on a Multidisk System
- default groups
- Changing a User's Default Group
- default home directories
- Changing a User's
Default Home Directory
- default permissions
- Default File Permissions (umask)
- default printers
- Setting the Default Printer
- default shells
- Changing a User's Default Shell
- device files
- IRIX Device Special Files
- device names
- Device Names in the Command Monitor
- device special files
- IRIX Device Special Files
- df command
- df (Free Disk Blocks) Command
- dfltprid parameter
- Extended Accounting Parameters
- dfltprid
- diagmode variable
- Command Monitor Environment Variables
- Digital Media Ring Buffers
- vino_mtune_dmrbpages
- directories
- file permissions
- File Permissions
- IRIX list
- IRIX root Directories
- permissions
- Changing File and Directory Access Permission
- Directory Permissions
- root
- IRIX root Directories
- disable command
- Summary of Command Monitor Commands
- Discretionary Access Control
- Setting Permissions with umask
- disk intensive processes
- Monitoring User Processes
- disk usage
- commands
- du (Disk Usage) Command
- formatting
- Booting a Specific Program with the boot Command
- input and output
- Disk
I/O Performance
- partitions
- Checking Installed Hardware in /hw
- Disk Space Management with Disk Partitions
- Partitions and Additional Disks for Improving Disk I/O
- site policy
- Configuring Disk and Swap Space
- space messages
- Disk Space Messages
- striping
- Logical Volumes for Improving Disk I/O
- diskless variable
- Command Monitor Environment Variables
- diskusg command
- diskusg (Disk Accounting) Command
- DISPLAY environment variable
- Changing the System Display
- DMA transfer
- maxdmasz
- do_extpacct parameter
- Extended Accounting Parameters
- do_extpacct
- do_procacct parameter
- Extended Accounting Parameters
- do_procacct
- do_sessacct parameter
- Extended Accounting Parameters
- do_sessacct
- du command
- du (Disk Usage) Command
- dump_level parameter
- Large System Tunable Parameters
-
General Parameters
- dump_level
- dwcluster parameter
- dwcluster
- eaddr command
- Summary of Command Monitor Commands
- EAGAIN error message
- IPC Parameters
- ecc_recover_enable parameter
-
General Parameters
- ecc_recover_enable
- editors
- Changing a User's Login Name
- EINVAL error message
- IPC Parameters
- emacs editing
- Korn Shell
Shortcuts
- e-mail
- E-mail Programs
- EMFILE error message
- IPC Parameters
- enable command
- Summary of Command Monitor Commands
- enableall command
- Summary of Command Monitor Commands
- ENOMEM error message
- vino_mtune_dmrbpages
- ENOSPC error message
- IPC Parameters
- environment variables
- command variables
- Command Monitor Environment Variables
- examining
- Viewing the Shell Environment
- setting
- Default Environment Variables
- error messages
- Receiving Kernel Messages and Adjusting Table Sizes
- IPC Parameters
- Troubleshooting System Configuration Using System Error Messages
- /etc/cshrc file
- User Environment
- /etc/fstab file
- System Log Book Maintenance
- Adding Virtual Swap Space
- Increasing Swap Space on a Multidisk System
- /etc/group file
- System Log Book Maintenance
- Group ID Numbers
- Editing the /etc/group File to Add a User
- /etc/init.d/swap file
- Turning On Virtual Swapping
- /etc/inittab file
- How init Controls the System State
- /etc/issue file
- Remote Login Message
- /etc/motd file
- System Unavailability Notification
- Message-of-the-Day Facility
- /etc/nologin file
- Disabling Login with the /etc/nologin File
- /etc/passwd file
- Password File Check
- System Log Book Maintenance
- User ID Numbers
- Editing the /etc/passwd File to Add a User Account
- /etc/profile file
- User Environment
- /etc/sys_id file
- Changing the System Name
- /etc/wall (broadcast message)
- System Unavailability Notification
- Ethernet
- booting
- bootp Protocol
- cables
- Ethernet Cable Issues
- gateways
- bootp Protocol
- EWOULDBLOCK error message
- unpdg_sendspace
- excluding a CPU from performing work
- Excluding a CPU from Performing Work
- exec system call
- Checking Available Memory
- ncargs
- Guidelines for Reducing High User Time
- exit command
- Summary of Command Monitor Commands
- fam(1M) man page
- Using the File Alteration Monitor
- fam(3X) man page
- Using the File Alteration Monitor
- fasthz parameter
- Timer Parameters
- fasthz
- fault containment
- Partitioning Your System
- feature list
- Checking Software Configuration Options with chkconfig
- File Alteration Monitor
- Using the File Alteration Monitor
- file compression
- File Compression and Archiving
- file permissions
- File Permissions
- File Permission Issues
- filename completion
- C Shell Shortcuts
- filename syntax
- Command Monitor Filename Syntax
- files
- IRIX list
- IRIX Directories and Files
- kernel tuning
- System Performance Tuning
- maniputation
- Finding and Manipulating Files
- permissions
- Changing File and Directory Access Permission
- find command
- Locating Files with the find Command
- Deleting a User from the System
- File Permission Issues
- finger command
- Disk Space Management with the quotas Subsystem
- first_retry parameter
- NFS Parameters
- first_retry
- fmodsw_extra parameter
- Loadable Drivers Parameters
- fmodsw_extra
- font selection
- Creating a
Custom Shell Window
- fork system call
- Checking Available Memory
- fread routine
- Guidelines for Reducing High User Time
- fru command
- fru Hardware Error Analysis Tool
- fsck command
- Starting the System
- fwrite routine
- Guidelines for Reducing High User Time
- gated command
- Checking Software Configuration Options with chkconfig
- gateways
- bootp Protocol
- gConsoleIn variable
- Command Monitor Environment Variables
- Command Monitor Environment Variables
- gConsoleOut variable
- Command Monitor Environment Variables
- general parameters
-
General Parameters
- getitimer system call
- fasthz
- getrlimit system call
-
Resource Limits Parameters
- gettimeofday parameter
- fasthz
- gettimeofday system call
- itimer_on_clkcpu
- getty command
- init Process: getty
- gfxinfo command
- Checking Installed Graphics Hardware with gfxinfo
- gpgshi parameter
- Large System Tunable Parameters
-
Paging Parameters
- gpgsmsk
- gpgshi
- maxfc
- gpgslo parameter
- Large System Tunable Parameters
-
Paging Parameters
- gpgsmsk
- gpgslo
- gpgsmsk parameter
-
Paging Parameters
- gpgsmsk
- gpgslo
- gr_osview command
- Process Monitoring with osview
- autoup
- gr_top command
- Process Monitoring with top
- Checking the CPU
- GraceWaitTime parameter
- NFS Parameters
- GraceWaitTime
- graphics hardware
- Checking Installed Graphics Hardware with gfxinfo
- group accounts
- deletion
- Deleting a Group from the System
- ID numbers
- Group ID Numbers
- temporary groups
- Changing User Groups with newgrp and multgrps
- user group changes
- Changing User Groups with newgrp and multgrps
- grpck command
- Password File Check
- hard disks
- Swap Space
- hardware graph
- How
IP Network Interfaces Are Assigned to Hardware Devices
- hardware inventory
- Checking Installed Hardware with hinv
- hardware memory barrier
- Advantages of Partitioning
- Advantages of Partitioning
- hardware upgrades
- Hardware Change Check
- help command
- Summary of Command Monitor Commands
- Getting Help in the Command Monitor
- hinv command
- Checking Installed Hardware with hinv
- Summary of Command Monitor Commands
- Determining the Amount of System Memory
- home directories
- Changing a User's
Default Home Directory
- host names
- Changing the System Name
- hwgraph man page
- Checking Installed Hardware with hinv
- I-bricks
- Partitioning Guidelines
- iconlogin (pandora )
- Checking Software Configuration Options with chkconfig
- icrash command
- icrash System Crash Analysis Utility
- id command
- Changing User Groups with newgrp and multgrps
- if_cl devices
- Networking Setup between Partitions
- ifconfig command
- Networking Setup between Partitions
- if/etc/issue file
- Remote Login Message
- init command
- IRIX Operating System
Run Levels (System State)
- Summary of Command Monitor Commands
- Reinitializing the Processor from the Command Monitor
- Command Monitor Environment Variables
- initstate variable
- Command Monitor Environment Variables
- inpcb parameter group
- Socket Parameters
- input redirection
- C Shell Shortcuts
- insecure_compatibility option
- Configuration File
- international keyboards
- Setting the Keyboard Variable
- Internet addresses
- Default Internet Address
- interpartition communication
- Networking Setup between Partitions
- interprocess communication (IPC) structures
- IPC Parameters
- intro man page
- Troubleshooting System Configuration Using System Error Messages
- inventory
- hardware
- Checking Installed Hardware with hinv
- software
- Checking Installed Software with versions
- I/O bound system
- Checking Disk I/O
- I/O daemons
- cachefs_max_threads
- I/O performance
- Disk
I/O Performance
- I/O throughput
- Guidelines for Improving I/O Throughput
- IP addresses
- IP (Network) Address Issues
- IP network interfaces
- How
IP Network Interfaces Are Assigned to Hardware Devices
- How
IP Network Interfaces Are Assigned to Hardware Devices
- ip26_allow_ucmem parameter
- Switch Parameters
- ip26_allow_ucmem
- IPC parameters
- IPC Parameters
- IRIX directories
- IRIX Directories and Files
- IRIX files
- IRIX Directories and Files
- IRIX shells
- IRIX Shells
- itimer_on_clkcpu parameter
- Timer Parameters
- itimer_on_clkcpu
- job control
- C Shell Shortcuts
- Korn Shell
Shortcuts
- kernel copying
- Copying the Kernel
- kernel tunable parameters
- System Performance Tuning
- IRIX Kernel Tunable Parameters
- keybd variable
- Setting the Keyboard Variable
- keyboard variables
- Setting the Keyboard Variable
- keyd variable
- Command Monitor Environment Variables
- kill command
- Terminating Processes with the kill Command
- killall command
- Killing Processes by Name with the killall Command
- bootp Protocol
- Booting across a Larger Network
- Korn shell
- Korn Shell
Shortcuts
- large page parameters
- Large Page Parameters
- Recommended Page Sizes
- lboot command
- bdevsw_extra
- fmodsw_extra
- limit command
-
Resource Limits Parameters
- line editor
- Command Line Editor in the Command Monitor
- load balancing
- NQE
- loadable driver parameters
- Loadable Drivers Parameters
- local_only option
- Configuration File
- lock_share_requests parameter
- NFS Parameters
- lock_share_requests
- lockd_blocking_thresh parameter
- NFS Parameters
- lockd_blocking_thresh
- lockd_grace_period parameter
- NFS Parameters
- lockd_grace_period
- logical swap space
- Defining and Managing Cpusets
- logical volumes
- Logical Volumes for Improving Disk I/O
- XVM Parameters
- login
- icons
- Checking Software Configuration Options with chkconfig
- ID numbers
- Changing a User's Login ID Number
- issues
- login and su Issues
- prevention
- Disabling Login with the /etc/nologin File
- shells
- Login Shells
- login command
- Disabling Login with the /etc/nologin File
- .login file
- Setting Permissions with umask
- User Environment
- lp command
- init Process: Run-Level Preparation
- lpadmin command
- Getting
Printer Status with lpstat
- lpstat command
- Getting
Printer Status with lpstat
- ls command
- Recursive Commands
- Changing File and Directory Access Permission
- Summary of Command Monitor Commands
- mail
- E-mail Programs
- make command
- ncargs
- MAKEDEV command
- Checking Installed Hardware with hinv
- malicious activity
- Malicious Activity Policy
- man command
- Creating Man Pages
- man pages
- Creating Man Pages
- master man page
- Overview of Kernel Tunable Parameters
- max_local_paggid parameter
- Extended Accounting Parameters
- max_local_paggid
- maxdc parameter
-
Paging Parameters
- maxdc
- maxdmasz parameter
- Large System Tunable Parameters
-
General Parameters
- maxdmasz
- dwcluster
- maxfc parameter
-
Paging Parameters
- maxfc
- maxlkmem parameter
-
Paging Parameters
- maxlkmem
- maxpglst parameter
-
Paging Parameters
- maxpglst
- maxpmem parameter
-
General Parameters
- maxpmem
- maxsc parameter
-
Paging Parameters
- maxsc
- maxsymlinks parameter
-
System Limits Parameters
- maxsymlinks
- maxup parameter
- Overview of Kernel Tunable Parameters
- Large System Tunable Parameters
-
System Limits Parameters
- maxwatchpoints parameter
-
System Limits Parameters
- maxwatchpoints
- mbmaxpages parameter
-
General Parameters
- mbmaxpages
- mem_tick_base_period parameter
- NUMA Parameters
- mem_tick_base_period
- mem_tick_enabled parameter
- NUMA Parameters
- mem_tick_enabled
- memory intensive processes
- Monitoring User Processes
- memory messages
- Memory and Swap Messages
- mesg command
- Sending Messages with the write Command
- message-of-the-day file
- System Unavailability Notification
- Message-of-the-Day Facility
- metacharacters
- Using Regular Expressions and Metacharacters
- metarouters
- Supported Configurations
- migration memory queue parameters
- Migration Memory Queue Parameters
- min_bufmem parameter
-
General Parameters
- min_bufmem
- min_file_pages parameter
- min_file_pages
- min_free_pages parameter
- min_free_pages
- min_local_paggid parameter
- Extended Accounting Parameters
- min_local_paggid
- minarmem parameter
-
Paging Parameters
- minarmem
- minasmem parameter
-
Paging Parameters
- minasmem
- Miser usage
- Defining and Managing Cpusets
- mkdir command
- Using find and cpio to Locate and Copy Files
- mkfile command
- Increasing Swap Space on a One-Disk System
- mkpart command
- mkpart Partition Configuration Command
- Partition Setup
- mload_auto_rtsyms parameter
- Switch Parameters
- mload_auto_rtsyms
- monitor variable
- Command Monitor Environment Variables
- mouse shortcuts
- Using Mouse Shortcuts
- mpadmin command
- Changing
Processor Assignment on Multiprocessor Systems
- Excluding a CPU from Performing Work
- mpin system call
- Checking Available Memory
- maxlkmem
- msgget system call
- IPC Parameters
- mtune man page
- Overview of Kernel Tunable Parameters
- multgrps command
- Changing User Groups with newgrp and multgrps
- multi command
- Changing System Run Levels
- multidisk system
- Increasing Swap Space on a Multidisk System
- multiple page sizes
- Multiple Page Sizes
- multiprocessor systems
- Changing
Processor Assignment on Multiprocessor Systems
- multiuser environment
- System Administration in a Multiuser Environment
- munlddelay parameter
- Loadable Drivers Parameters
- munlddelay
- mv command
- Scheduling Tasks with the at Command
- nactions parameter
- CPU Action Parameter
- named command
- Checking Software Configuration Options with chkconfig
- nbuf parameter
- Large System Tunable Parameters
-
General Parameters
- nbuf
- ncallout parameter
-
General Parameters
- ncallout
- ncargs parameter
-
Resource Limits Parameters
- ncargs
- ncsize parameter
-
General Parameters
- ncsize
- ndquot parameter
-
General Parameters
- ndquot
- netaddr variable
- Command Monitor Environment Variables
- Partitioning Guidelines
- network addresses
- IP (Network) Address Issues
- network booting
- bootp Protocol
- Network Bootup Issues
- Network File System
- Disk Space Management with NFS
- maxsc
- NFS Parameters
- Network Queuing Environment
- NQE
- new user accounts
- Adding User Accounts Using
Shell Commands
- new user groups
- Adding User Groups Using Shell Commands
- newgrp command
- Changing User Groups with newgrp and multgrps
- newproj command
- Project ID Numbers
- news command
- Sending Messages with the news Command
- NFS parameters
- NFS Parameters
- nfs_portmon parameter
- NFS Parameters
- nfs_portmon
- ngroups_max parameter
-
System Limits Parameters
- ngroups_max
- nice command
- Prioritizing Processes with nice
- nlpages_16m parameter
- Large Page Parameters
- nlpages_16m
- Reserving Large Pages
-
Paging Parameters
- nlpages_1m parameter
- Large Page Parameters
- nlpages_1m
- Reserving Large Pages
-
Paging Parameters
- nlpages_256K parameter
- nlpages_256k
- Reserving Large Pages
-
Paging Parameters
- nlpages_4m parameter
- Large Page Parameters
- nlpages_4m
- Reserving Large Pages
-
Paging Parameters
- nlpages_64k parameter
- Reserving Large Pages
-
Paging Parameters
- nogfxkbd variable
- Command Monitor Environment Variables
- nondegrading processes
- Prioritizing Processes with npri
- nonvolatile RAM
- Command Monitor Environment Variables
- normal_retry parameter
- NFS Parameters
- normal_retry
- nosuidshells parameter
- Switch Parameters
- nosuidshells
- notape variable
- Command Monitor Environment Variables
- npri command
- Changing the Priority of a Running Process
- nproc parameter
- Overview of Kernel Tunable Parameters
- Large System Tunable Parameters
- Changing a Parameter
-
General Parameters
- nproc
- nprofile parameter
-
System Limits Parameters
- nprofile
- nroff command
- Creating Man Pages
- Using sar and timex during the Execution of a Command
- NUMA parameters
- NUMA Parameters
- NUMA systems
- zone_accum_limit
- numa_kernel_replication_ratio parameter
- Page Replication Parameter
- numa_kernel_replication_ratio
- numa_migr_auto_migr_mech parameter
- Migration Memory Queue Parameters
- numa_migr_coaldmigr_mech
- numa_migr_auto_migr_mech
- numa_migr_bounce_control_interval parameter
- NUMA Parameters
- numa_migr_bounce_control_interval
- numa_migr_coaldmigr_mech parameter
- Migration Memory Queue Parameters
- numa_migr_dampening_enabled parameter
- NUMA Parameters
- numa_migr_dampening_enabled
- numa_migr_dampening_factor parameter
- NUMA Parameters
- numa_migr_dampening_factor
- numa_migr_default_mode parameter
- NUMA Parameters
- numa_migr_default_mode
- numa_migr_default_threshold parameter
- NUMA Parameters
- numa_migr_default_threshold
- numa_migr_freeze_enabled parameter
- NUMA Parameters
- numa_migr_freeze_enabled
- numa_migr_freeze_threshold parameter
- NUMA Parameters
- numa_migr_freeze_threshold
- numa_migr_melt_enabled parameter
- NUMA Parameters
- numa_migr_melt_enabled
- numa_migr_melt_threshold parameter
- NUMA Parameters
- numa_migr_melt_threshold
- numa_migr_memory_low_enabled parameter
- NUMA Parameters
- numa_migr_memory_low_enabled
- numa_migr_memory_low_threshold parameter
- NUMA Parameters
- numa_migr_memory_low_threshold
- numa_migr_min_distance parameter
- NUMA Parameters
- numa_migr_min_distance
- numa_migr_min_maxradius parameter
- NUMA Parameters
- numa_migr_min_maxradius
- numa_migr_threshold_reference parameter
- NUMA Parameters
- numa_migr_threshold_reference
- numa_migr_traffic_control_enabled parameter
- NUMA Parameters
- numa_migr_traffic_control_enabled
- numa_migr_traffic_control_interval parameter
- NUMA Parameters
- numa_migr_traffic_control_interval
- numa_migr_traffic_control_threshold parameter
- NUMA Parameters
- numa_migr_traffic_control_threshold
- numa_migr_unpegging_control_enabled parameter
- NUMA Parameters
- numa_migr_unpegging_control_enabled
- numa_migr_unpegging_control_interval parameter
- NUMA Parameters
- numa_migr_unpegging_control_interval
- numa_migr_unpegging_control_threshold parameter
- NUMA Parameters
- numa_migr_unpegging_control_threshold
- numa_migr_user_migr_mech parameter
- Migration Memory Queue Parameters
- numa_migr_vehicle parameter
- NUMA Parameters
- numa_migr_vehicle
- numa_paging_node_freemem_low_threshold parameter
-
Paging Parameters
- numa_paging_node_freemem_low_threshold
- numa_refcnt_default_mode parameter
- NUMA Parameters
- numa_refcnt_overflow_threshold parameter
- NUMA Parameters
- numa_refcnt_overflow_threshold
- numa_repl_mem_lowmark parameter
- numa_migr_user_migr_mech
- numa_zone_radius_max parameter
- NUMA Parameters
- numa_zone_radius_max
- NUMAlink
- Partitioning Your System
- Networking Setup between Partitions
- off command
- Summary of Command Monitor Commands
- open system call
- maxsymlinks
- operating system tuning
- IRIX Kernel Tunable Parameters
- operating systems
- rebuild issues
- Operating System Rebuild Issues
- tuning
- System Performance Tuning
- Operating System Tuning
- version
- Checking Basic System Identification with uname
- options, system software
- Setting Software Configuration Options with chkconfig
- OSLoader variable
- Command Monitor Environment Variables
- OSLoadFilename variable
- Command Monitor Environment Variables
- OSLoadOptions variable
- Command Monitor Environment Variables
- OSLoadPartition variable
- Partitioning Guidelines
- Command Monitor Environment Variables
- Command Monitor Environment Variables
- osview command
- Process Monitoring with osview
- Operating System Tuning Procedure
- output redirection
- C Shell Shortcuts
- page faults
- Paging and Swapping
- page sizes
- Multiple Page Sizes
- pagecolor variable
- Command Monitor Environment Variables
- paging
- Monitoring Paging and Swap Space
- Paging and Swapping
- Swapping and Paging Messages
- paging parameters
-
Paging Parameters
- pandora command
- Checking Software Configuration Options with chkconfig
- panic messages
- Panic Page Free
- Swapping and Paging Messages
- panic_on_sbe parameter
- Switch Parameters
- panic_on_sbe
- par command
- timex, sar, and par
- parameters
- kernel
- System Performance Tuning
- IRIX Kernel Tunable Parameters
- large system tuning
- Large System Tunable Parameters
- Partition Configuration Tool
- requirements for use
- partmgr Partition Configuration Tool
- partitioned systems
- Partitioning Your System
- partitions
- communication
- Networking Setup between Partitions
- configuration tool
- partmgr Partition Configuration Tool
- configurations
- Supported Configurations
- controller
- Networking Setup between Partitions
- guidelines
- Partitioning Guidelines
- setup
- Partition Setup
- usage
- Partitioning Your System
- partmgr command
- partmgr Partition Configuration Tool
- passwd command
- Summary of Command Monitor Commands
- password file
- Account Passwords
- Editing the /etc/passwd File to Add a User Account
- passwords
- account
- Account Passwords
- changing
- Changing a User's Password with the passwd Command
- forgotten
- Changing a User's Password with the passwd Command
- PROM
- Setting a PROM Password
- system
- Setting a PROM Password
- path variable
- Command Monitor Environment Variables
- pathname command
- Summary of Command Monitor Commands
- PCP
- Performance Co-Pilot
- percent_totalmem_16k_pages parameter
- Tunable Parameters for
Coalescing
-
Paging Parameters
- percent_totalmem_16m_pages parameter
- Large System Tunable Parameters
- Tunable Parameters for
Coalescing
-
Paging Parameters
- percent_totalmem_1m_pages parameter
- Large System Tunable Parameters
- Tunable Parameters for
Coalescing
-
Paging Parameters
- percent_totalmem_256k_pages parameter
- Large System Tunable Parameters
- Tunable Parameters for
Coalescing
-
Paging Parameters
- percent_totalmem_4m_pages parameter
- Large System Tunable Parameters
- Tunable Parameters for
Coalescing
-
Paging Parameters
- percent_totalmem_64k_pages parameter
- Large System Tunable Parameters
-
Paging Parameters
- percent_totalmem_64k_pages
- Performance Co-Pilot
- Performance Co-Pilot
- performance tuning
- System Performance Tuning
- IRIX Kernel Tunable Parameters
- permissions
- changing
- Changing Permissions
- default
- User Privacy
- directories
- Directory Permissions
- files
- File Permissions
- Changing File and Directory Access Permission
- umask command
- Setting Permissions with umask
- physical memory pages
- rsshogfrac
- ping command
- Summary of Command Monitor Commands
- pixie command
- Guidelines for Reducing High User Time
- plock system call
- Checking Available Memory
- maxlkmem
- portmap_timeout parameter
- NFS Parameters
- portmap_timeout
- POSIX line disciplines
- posix_tty_default
- posix_tty_default parameter
- Switch Parameters
- posix_tty_default
- PostScript format
- Encapsulated PostScript File v.3.0 vs. PostScript File Format
- power failures
- Power Failure Detected
- printenv command
- Summary of Command Monitor Commands
- Summary of Command Monitor Commands
- Displaying the Current Command Monitor Environment Variables
- printers
- Getting
Printer Status with lpstat
- Setting the Default Printer
- priorities
- Prioritizing Processes
- Changing the Priority of a Running Process
- ProbeAllScsi variable
- Command Monitor Environment Variables
- process_core_cpu_logging parameter
- Switch Parameters
- process_core_cpu_logging
- processes
- cpusets
- Defining and Managing Cpusets
- monitoring
- Monitoring User Processes
- priorities
- Prioritizing Processes
- Prioritizing Processes with nice
- termination
- Terminating Processes
- processor assignment
- Changing
Processor Assignment on Multiprocessor Systems
- prof command
- Guidelines for Reducing High User Time
- Analyzing Program Behavior with prof
- .profile file
- Setting Permissions with umask
- User Environment
- project ID number
- chproj
- Project ID Numbers
- newproj
- Project ID Numbers
- prom command
- Using the Command (PROM) Monitor
- PROM monitor
- Shutting Down the System from Multiuser Mode
- Entering the Command (PROM) Monitor
- PROM passwords
- Setting a PROM Password
- prompoweroff variable
- Command Monitor Environment Variables
- ps command
- Process Monitoring with ps
- Checking Available Memory
- Checking Application Performance with timex
- pset command
- Changing
Processor Assignment on Multiprocessor Systems
- pwck command
- Password File Check
- Scheduling Tasks with the cron Command
- Adding User Accounts Using
Shell Commands
- Verifying a New Account
- quot command
- quot (Disk Usage by User) Command
- quotas subsystem
- Disk Space Management with the quotas Subsystem
- r4k_div_patch parameter
- Switch Parameters
- r4k_div_patch
- rbaud variable
- Command Monitor Environment Variables
- read system call
- Guidelines for Reducing High User Time
- reboot command
- Changing System Run Levels
- Entering the Command (PROM) Monitor
- Changing a Parameter
- reboot_on_panic parameter
- Switch Parameters
- reboot_on_panic
- rebound variable
- Command Monitor Environment Variables
- reconfiguration
- Operating System Tuning: Changing Parameters and Reconfiguring the System
- recursive commands
- Recursive Commands
- regular expressions
- Using Regular Expressions and Metacharacters
- remote login messages
- Remote Login Message
- Remote Login Message
- remote workstations
- Displaying Windows on Remote Workstations
- renice command
- Changing the Priority of a Running Process
- reporting trouble
- User Request Service
- reserve_ncallout parameter
-
General Parameters
- reserve_ncallout
- Reset button
- Booting a Program from the Command Monitor
- reset_limits_on_exec parameter
- Switch Parameters
- reset_limits_on_exec
- resetenv command
- Summary of Command Monitor Commands
- resetpw command
- Summary of Command Monitor Commands
- resource limits parameters
-
Resource Limits Parameters
- RestorePastEnv variable
- Command Monitor Environment Variables
- restrict_fastprof parameter
- Switch Parameters
- restrict_fastprof
- restricted shell
- Login Shells
- restricted_chown parameter
- Switch Parameters
- restricted_chown
- rlimit_core_cur parameter
- Overview of Kernel Tunable Parameters
-
Resource Limits Parameters
- rlimit_core_cur
- rlimit_core_max parameter
-
Resource Limits Parameters
- rlimit_core_max
- rlimit_cpu_cur parameter
-
Resource Limits Parameters
- rlimit_cpu_cur
- cpulimit_gracetime
- rlimit_cpu_max parameter
-
Resource Limits Parameters
- rlimit_cpu_max
- rlimit_data_cur parameter
- Overview of Kernel Tunable Parameters
- Large System Tunable Parameters
-
Resource Limits Parameters
- rlimit_data_cur
- rlimit_data_max parameter
- Large System Tunable Parameters
-
Resource Limits Parameters
- rlimit_data_max
- rlimit_fsize_cur parameter
- Overview of Kernel Tunable Parameters
-
Resource Limits Parameters
- rlimit_fsize_cur
- rlimit_fsize_max parameter
-
Resource Limits Parameters
- rlimit_fsize_max
- rlimit_nofile_cur parameter
- Overview of Kernel Tunable Parameters
-
Resource Limits Parameters
- rlimit_nofile_cur
- rlimit_nofile_max parameter
-
Resource Limits Parameters
- rlimit_nofile_max
- rlimit_pthreads_cur parameter
-
Resource Limits Parameters
- rlimit_pthread_cur
- rlimit_pthreads_max parameter
-
Resource Limits Parameters
- rlimit_pthread_max
- rlimit_rss_cur parameter
- Overview of Kernel Tunable Parameters
- Large System Tunable Parameters
- Large System Tunable Parameters
-
Resource Limits Parameters
- rlimit_rss_cur
- rlimit_rss_max parameter
- Large System Tunable Parameters
-
Resource Limits Parameters
- rlimit_rss_max
- rlimit_stack_cur parameter
- Large System Tunable Parameters
-
Resource Limits Parameters
- rlimit_stack_max parameter
- Large System Tunable Parameters
-
Resource Limits Parameters
- rlimit_stack_max
- rlimit_vmem_cur parameter
- Overview of Kernel Tunable Parameters
- Large System Tunable Parameters
-
Resource Limits Parameters
- rlimit_vmem_cur
- maxlkmem
- rlimit_vmem_max parameter
- Large System Tunable Parameters
-
Resource Limits Parameters
- rlimit_vmem_max
- rlogin command
- Displaying Windows on Remote Workstations
- rm command
- Recursive Commands
- root directories
- Superuser (root) Account Access Restriction
- IRIX root Directories
- root filesystem
- root Filesystem Not Found
- root partition
- Checking Installed Hardware in /hw
- root variable
- Command Monitor Environment Variables
- Partitioning Guidelines
- routed command
- Checking Software Configuration Options with chkconfig
- rpcinfo command
- Basic fam Troubleshooting
- rsh command
- Displaying Windows on Remote Workstations
- rsshogfrac parameter
- Large System Tunable Parameters
-
Resource Limits Parameters
- rsshogfrac
- rsshogslop parameter
-
Resource Limits Parameters
- rsshogslop
- rtcpus parameter
- rtcpus
- rtnetd command
- Checking Software Configuration Options with chkconfig
- run levels
- Starting the System
- IRIX Operating System
Run Levels (System State)
- rwhod command
- Checking Software Configuration Options with chkconfig
- sar command
- init Process: Run-Level Preparation
- Checking Software Configuration Options with chkconfig
- Monitoring Paging and Swap Space
- Process Monitoring with sar
- timex, sar, and par
- Operating System Tuning Procedure
- sash
- Standalone Shell (sash)
- savecore command
- Saving a Crash Dump with savecore
- savecore I/O Error
- sbe_log_errors parameter
- Switch Parameters
- sbe_log_errors
- sbe_mfr_override parameter
- Switch Parameters
- sbe_mfr_override
- sbe_report_cons parameter
- Switch Parameters
- sbe_report_cons
- sbrk system call
- Checking Available Memory
- scache_pool_size parameter
-
Paging Parameters
- scache_pool_size
- scalability
- Partitioning Your System
- schedules
- Task Scheduling with the at, batch, and cron Commands
- SCSI controllers
- SCSI Controller Reset
- sed command
- Finding and Manipulating Files
- sed Editor
- select system call
- Increasing CPU Performance
- Guidelines for Reducing High User Time
- semmni parameter
- Large System Tunable Parameters
- IPC Parameters
- semopm parameter
- Large System Tunable Parameters
- Large System Tunable Parameters
- Large System Tunable Parameters
- semume parameter
- Large System Tunable Parameters
- setenv command
- Summary of Command Monitor Commands
- Changing Command Monitor Environment Variables
- Booting the Standalone Shell
- bootp Protocol
- setpart command
- Partition Setup
- Summary of Command Monitor Commands
- setrlimit system call
-
Resource Limits Parameters
- setsockopt system call
- unpst_sendspace
- tcp_recvspace
- settimer system call
- fasthz
- Setting core file permissions
- coremask
- setting environment variables
- Default Environment Variables
- SGI Origin 3000 series machine
- Partitioning Your System
- sgilog variable
- Command Monitor Environment Variables
- sh command
- Using timex
- shell command
- ncargs
- shell windows
- colors
- Creating a
Custom Shell Window
- font selection
- Creating a
Custom Shell Window
- shells
- commands
- Adding User Accounts Using
Shell Commands
- scripts
- C Shell Shortcuts
- startup files
- User Environment
- user default
- Changing a User's Default Shell
- variables
- Configurable Shell Environment Variables
- Default Environment Variables
- shlbmax parameter
-
Resource Limits Parameters
- shlbmax
- shmat system call
- IPC Parameters
- shmget system call
- IPC Parameters
- shmmax parameter
- Large System Tunable Parameters
- IPC Parameters
- shmmin parameter
- IPC Parameters
- shmop system call
- Guidelines for Reducing High User Time
- shortcuts
- C shell
- C Shell Shortcuts
- Korn shell
- Korn Shell
Shortcuts
- mouse
- Using Mouse Shortcuts
- showconfig variable
- Command Monitor Environment Variables
- shutdown command
- Shutting Down the System from Single-User Mode
- Changing Multiuser Mode to Single-User Mode with the shutdown Command
- SIGKILL signal
- cpulimit_gracetime
- SIGXCPU signal
- cpulimit_gracetime
- single command
- Changing System Run Levels
- Summary of Command Monitor Commands
- single-user mode
- Changing Multiuser Mode to Single-User Mode with the shutdown Command
- site policies
- accounts
- Account Passwords
- disk usage
- Configuring Disk and Swap Space
- passwords
- Account Passwords
- privacy
- User Privacy
- root access
- Superuser (root) Account Access Restriction
- user ID numbers
- Account Passwords
- sm_timeout parameter
- NFS Parameters
- sm_timeout
- socket parameters
- Socket Parameters
- software configuration options
- Setting Software Configuration Options with chkconfig
- software customization
- Setting Software Configuration Options with chkconfig
- software inventory
- Checking Installed Software with versions
- software upgrades
- Software Upgrade Check
- special login shells
- Special Login Shells
- sprofil system call
- nprofile
- sshmseg parameter
- Overview of Kernel Tunable Parameters
- Large System Tunable Parameters
- IPC Parameters
- standalone shell
- Standalone Shell (sash)
- startup messages
- System Restarting Information
- stat system call
- maxsymlinks
- striping
- Logical Volumes for Improving Disk I/O
- su command
- Locking a User Account
- Creating and Booting a New Kernel with autoconfig
- su Messages
- subnetsarelocal parameter
- Switch Parameters
- subnetsarelocal
- Sun NIS master
- Troubleshooting fam When Using a
Sun NIS Master
- superuser groups
- Changing User Groups with newgrp and multgrps
- supported configurations
- Supported Configurations
- svc_maxdupreqs parameter
- NFS Parameters
- svc_maxdupreqs
- svr3pipe parameter
- Switch Parameters
- svr3pipe
- swap command
- Monitoring Paging and Swap Space
- Listing Swap Space with the swap -l Command
- Swapping and Paging Messages
- swap space
- File Compression and Archiving
- Swap Space
- Paging and Swapping
- Memory and Swap Messages
- Swapping and Paging Messages
- swap variable
- Command Monitor Environment Variables
- switch parameters
- Switch Parameters
- symbolic links
- maxsymlinks
- syntax
-
Command Monitor Command Syntax
- Command Monitor Filename Syntax
- syslog command
- sysmon, the
System Log Viewer
- syslogd messages
- syslogd Daemon Issues
- sysmon command
- sysmon, the
System Log Viewer
- syssegsz parameter
- Large System Tunable Parameters
-
General Parameters
- syssegsz
- system backup
- Backing Up the System
- system call errors
- IPC Parameters
- system calls
- Receiving Kernel Messages and Adjusting Table Sizes
- system clocks
- System Off Message
- system configuration
- Access Control Lists
- Access
Control
Lists (ACLs) and Capabilities
- changing
- Setting Software Configuration Options with chkconfig
- checking
- Configuring the IRIX Operating System
- Checking Software Configuration Options with chkconfig
- date and time
- Changing the System Date and Time
- default printers
- Setting the Default Printer
- defaults
- Setting and Changing System Defaults
- directory permissions
- Changing File and Directory Access Permission
- file permissions
- Changing File and Directory Access Permission
- options
- Checking Software Configuration Options with chkconfig
- processor assignment
- Changing
Processor Assignment on Multiprocessor Systems
- software options
- Setting Software Configuration Options with chkconfig
- system display
- Changing the System Display
- system names
- Changing the System Name
- time zone
- Setting the Time Zone
- system limits parameters
-
System Limits Parameters
- system logs
- hardcopy
- System Log Book Maintenance
- viewers
- sysmon, the
System Log Viewer
- System Manager
- Administration Tools Overview
- system monitoring tools
-
System Monitoring Tools
- system passwords
- Setting a PROM Password
- Setting a PROM Password
- system shutdown
- /etc/inittab
- Powering Off the System Using /etc/inittab
- multiuser mode
- Shutting Down the System from Multiuser Mode
- notification
- Superuser (root) Account Access Restriction
- system startup
- Starting the System
- System Restarting Information
- SystemPartition variable
- Partitioning Guidelines
- Command Monitor Environment Variables
- systems
- directories
-
Other Important IRIX System Directories
- error messages
- Troubleshooting System Configuration Using System Error Messages
- files
-
Other Important IRIX System Directories
- names
- Changing the System Name
- partitions
- Partitioning Your System
- reconfiguration
- Operating System Tuning: Changing Parameters and Reconfiguring the System
- state
- Starting the System
- tuning
- System Performance Tuning
- IRIX Kernel Tunable Parameters
- systune command
- Files Used for Kernel Tuning
- cpulimit_gracetime
- Socket Parameters
- systune system call
- XVM Parameters
- tar command
- Deleting a User from the System
- tcp_hashtablesz parameter
- Socket Parameters
- tcp_hashtablesz
- Socket Parameters
- tcp_recvspace parameter
- Socket Parameters
- tcp_recvspace
- tcp_sack parameter
- Socket Parameters
- tcp_sack
- tcp_sendspace parameter
- tcp_sendspace
- Socket Parameters
- TCP/IP boot protocol
- bootp Protocol
- TCP/IP sockets
- Socket Parameters
- tcsh shell
- tcsh Shell
- telinit command
- Changing System Run Levels
- telnet command
- Displaying Windows on Remote Workstations
- text manipulation
- Copying and Pasting
Text with the Mouse
- time and date
- Changing the System Date and Time
- time zones
- Setting the Time Zone
- timed command
- Checking Software Configuration Options with chkconfig
- Changing the System Date and Time
- Time Server Daemon Message
- timers man page
- fasthz
- timetrim parameter
- Timer Parameters
- timetrim
- timex command
- timex, sar, and par
- Checking Application Performance with timex
- tlbdrop parameter
-
Paging Parameters
- tlbdrop
- tools
- Administration Tools Overview
- top command
- Process Monitoring with top
- Checking the CPU
- trouble reporting
- User Request Service
- troubleshooting
- disk usage
- Swap Space
- fam issues
- Basic fam Troubleshooting
- system error messages
- Troubleshooting System Configuration Using System Error Messages
- tty_auto_strhold parameter
- Switch Parameters
- tty_auto_strhold
- tunable parameters
- IRIX Kernel Tunable Parameters
- tuning
- System Performance Tuning
- TZ environment variable
- Setting the Time Zone
- udp_hashtablesz parameter
- udp_hashtablesz
- Socket Parameters
- Socket Parameters
- UDS sockets
- Socket Parameters
- umask command
- Setting Permissions with umask
- Default File Permissions (umask)
- uname command
- Checking Basic System Identification with uname
- unbootable kernel
- Recovering from an Unbootable Kernel
- /unix.install directory
- Changing a Parameter
- unpdg_recvspace parameter
- unpdg_recvspace
- Socket Parameters
- unpdg_sendspace parameter
- unpdg_sendspace
- Socket Parameters
- unpst_recvspace parameter
- unpst_recvspace
- Socket Parameters
- unpst_sendspace parameter
- unpst_sendspace
- Socket Parameters
- unsetenv command
- Summary of Command Monitor Commands
- Removing Environment Variables
- untrusted_user option
- Configuration File
- upgrading hardware
- Hardware Change Check
- upgrading software
- Software Upgrade Check
- use_old_serialnum parameter
- Switch Parameters
- use_old_serialnum
- user accounts
- comment fields
- Changing a User's Comment Field
- default group
- Changing a User's Default Group
- default shells
- Changing a User's Default Shell
- deletion
- Deleting a User from the System
- group ID numbers
- Group ID Numbers
- home directories
- Changing a User's
Default Home Directory
- information changes
- Changing User Information
- locked accounts
- Locking a User Account
- login ID number
- Changing a User's Login ID Number
- login name
- Changing a User's Login Name
- login shells
- Login Shells
- password
- Changing a User's Password with the passwd Command
- user ID numbers
- User Account Administration
- verification
- Verifying a New Account
- user communication
- Sending Messages
- E-mail Programs
- Message-of-the-Day Facility
- Sending Messages with the news Command
- Sending Messages with the write Command
- Sending Messages with the wall Command
- user environment
- description
- User Environment
- environment variables
- Configurable Shell Environment Variables
- login shells
- Login Shells
- special shells
- Special Login Shells
- user ID number
- Account Passwords
- user notification
- Superuser (root) Account Access Restriction
- user privacy
- Account Passwords
- user processes
- Monitoring User Processes
- user trouble log
- System Log Book Maintenance
- usinit routine
- Guidelines for Reducing High User Time
- /usr/include/sys/immu.h file
- gpgsmsk
- /usr/news directory
- Sending Messages with the news Command
- utrace_bufsize parameter
-
General Parameters
- utrace_bufsize
- /var/adm/crash directory
- du (Disk Usage) Command
- Wasted Disk Space
- /var/adm/SYSLOG file
- Starting the System
- Receiving Kernel Messages and Adjusting Table Sizes
- timetrim
- Disk Space Messages
- login Messages
- Time and Date Messages
- variables
- bootfile
- Booting the Default File with the auto Command
- environment
- Changing Command Monitor Environment Variables
- keyboard
- Setting the Keyboard Variable
- path
- Booting a Specific Program with the boot Command
- removal
- Removing Environment Variables
- /var/sysgen/master.d directory
- Overview of Kernel Tunable Parameters
- Creating and Booting a New Kernel with autoconfig
- IRIX Kernel Tunable Parameters
- /var/sysgen/master.d/kernel file
- Receiving Kernel Messages and Adjusting Table Sizes
- /var/sysgen/mtune directory
- Overview of Kernel Tunable Parameters
- Creating and Booting a New Kernel with autoconfig
- IRIX Kernel Tunable Parameters
- IRIX Kernel Tunable Parameters
- /var/sysgen/system directory
- Creating and Booting a New Kernel with autoconfig
- verbose variable
- Command Monitor Environment Variables
- version command
- Summary of Command Monitor Commands
- versions command
- Checking Installed Software with versions
- vfs_syncr parameter
-
Paging Parameters
- bdflushr
- bdflushr
- bdflushr
-
vfs_syncr
-
vfs_syncr
- vfssw_extra parameter
- Loadable Drivers Parameters
- vfssw_extra
- vhand program
-
Paging Parameters
- vi command
- Korn Shell
Shortcuts
- Changing a User's Login Name
- Video In No Out (VINO) parameter
- VINO Parameter
- vino_mtune_dmrbpages parameter
- vino_mtune_dmrbpages
- virtual memory
- Checking Available Memory
- virtual swap space
- Adding Virtual Swap Space
- Turning On Virtual Swapping
- volume variable
- Command Monitor Environment Variables
- w command
- System Unavailability Notification
- wall command
- Sending Messages with the wall Command
- Sending Messages with the wall Command
- whodo command
- System Unavailability Notification
- windows
- creation
- C Shell Shortcuts
- custom shells
- Creating a
Custom Shell Window
- remote workstations
- Displaying Windows on Remote Workstations
- WQE
- NQE
- write command
- Sending Messages with the write Command
- Sending Messages with the write Command
- write system call
- Guidelines for Reducing High User Time
- xfontsel command
- Creating a
Custom Shell Window
- xhost command
- Changing the System Display
- xpc driver
- Networking Setup between Partitions
- xpg4_sticky_dir parameter
- Switch Parameters
- xpg4_sticky_dir
- xtab_verification option
- Configuration File
- XVM parameters
- XVM Parameters
- xvm_max_revive_rsc parameter
- XVM Parameters
- xvm_max_revive_rsc
- xvm_max_revive_threads parameter
- XVM Parameters
- xvm_max_revive_threads
- xwsh command
- Creating a
Custom Shell Window
- zone_accum_limit parameter
-
Paging Parameters
- zone_accum_limit