List of Figures

| Table of Contents | List of Figures | List of Tables |

Figure 1-1. Front and Side View of an SGI Origin 300 Server

Figure 1-2. Rear and Side View of an SGI Origin 300 Server

Figure 1-3. Front Controls and Indicators

Figure 1-4. Rear I/O Ports and Features

Figure 1-5. Memory Bank Layout

Figure 2-1. Location of Table-mounting Feet

Figure 2-2. Removing the Chassis Rail from the Slide Rail

Figure 2-3. Attaching the Rear Mounting Bracket to the Slide Rail

Figure 2-4. Attaching Chassis Rails to the Server Chassis

Figure 2-5. Mounting-hole Pattern of Rack Vertical Rails

Figure 2-6. Placing the Barnuts on the Rack Rails

Figure 2-7. Attaching the Slide Rail to the Rack

Figure 2-8. Installing Clipnuts in Rack Rails

Figure 2-9. Pressing the Safety Latches

Figure 2-10. Securing the Server to the Rack

Figure 2-11. Releasing the Safety Latches

Figure 2-12. Releasing the Slide Latches

Figure 3-1. Power Connector on the Rear of the Server

Figure 3-2. Location of the L1 Console Port

Figure 3-3. Location of the Power Button

Figure 3-4. Front Panel Functions

Figure 4-1. PCI Slots Located in the Rear of the Origin 300 Server

Figure 4-2. Opening Server to Install PCI Card

Figure 4-3. Removing Blanking Plate

Figure 4-4. Installing a PCI Card

Figure 4-5. Opening Server to Remove PCI Card

Figure 4-6. Removing a PCI Card

Figure 4-7. Disk Drive Location

Figure 4-8. Installing a Disk Drive

Figure 4-9. Removing a Disk Drive

Figure 4-10. DIMM Slots

Figure 4-11. Opening Server to Install DIMM

Figure 4-12. Inserting a DIMM

Figure 4-13. Opening Server to Remove DIMM

Figure 4-14. Removing a DIMM

Figure B-1. Rear Panel of Origin 300 Server

Figure B-2. DB9 Pin Assignments

Figure B-3. RJ-45 Connector Pin Assignments

Figure B-4. External SCSI Port Pin Number Locations

Figure B-5. Stereo Jack Connector Conductors

Figure B-6. USB Type A Connector Pin Number Locations

Figure B-7. USB Type B Connector Pin Number Locations