The Dials and Buttons Confidence test requires user interaction. You must press the buttons on the button box and turn the dials on the dial box. As the keys on the dials unit are pressed, the corresponding buttons on the graphical display should be highlighted. As the dials are turned, the graphical display should change from white to red; if the dials are turned in the opposite direction, the display should change from red to white.

The test does not display a “passed” or “failed” message when it is complete. You determine the results of the test by monitoring the test itself.

If the buttons that are pressed on the button box are highlighted on the corresponding buttons on the graphical display, the test was passed. If the buttons that are pressed on the button box are not highlighted on the graphical interface, the button test was failed.

If the graphical display of the dials changes as you turn the dials, the test was passed. If the graphical display of the dials unit does not change from white to red as you turn the dials, the test was failed.

For additional questions or assistance, contact your local support provider.