XVM Volume Manager Administrator's Guide describes the configuration and administration of XVM logical volumes using the XVM Volume Manager. It supports the IRIX 6.5.19 release and SGI ProPack v2.1 for Linux.
 | Note: To use XVM under SGI ProPack, you must obtain and install the appropriate FLEXlm license. |
This guide contains the following information:
Chapter 1, “Introduction to the XVM Volume Manager”, describes the features of the XVM Volume Manager and provides an introduction to the components of an XVM logical volume. It also provides instructions for installing XVM as a standalone volume manager.
Chapter 2, “XVM Administration Concepts”, describes the concepts that underlie the administration commands.
Chapter 3, “The XVM Command Line Interface”, describes the operation of the XVM command line interface and the features it provides.
Chapter 4, “XVM Administration Commands”, summarizes the XVM commands and provides examples of each command. It also provides information about configuring XVM system disks and about the XVM snapshot feature.
Chapter 5, “XVM Administration Procedures”, provides examples of many common XVM administration procedures.
Chapter 6, “Statistics”, provides examples of the statistics that XVM maintains for the components of XVM logical volumes.
Chapter 7, “XVM Volume Manager Operation”, describes various aspects of the way the XVM Volume Manager operates.
Chapter 8, “The XVM Manager GUI”, describes the installation and operation of the XVM Manager graphical user interface (GUI).
Appendix A, “XVM and XLV Logical Volumes”, provides a side-by-side comparison of XVM and XLV logical volume configuration and provides procedures for converting an existing XLV logical volume configuration to an XVM configuration.
Note: To use the mirroring feature described in this guide under either IRIX or Linux, you must purchase the XFS Volume Plexing software option and obtain and install a FLEXlm license.
The following documents contain additional information required to use this product under IRIX:
CXFS Version 2 Software Installation and Administration Guide
IRIX Admin: Disks and Filesystems
For information on installing a FLEXlm license under IRIX that enables mirroring in XVM logical volumes, see IRIX Admin: Software Installation and Licensing.
These type conventions and symbols are used in this guide:
| command | This fixed-space font denotes literal items (such as commands, files, routines, pathnames, signals, messages, programming language structures, and e-mail addresses) and items that appear on the screen. | |
| variable | Italic typeface denotes variable entries and words or concepts being defined. | |
| user input | This bold, fixed-space font denotes literal items that the user inters in interactive sessions. Output is shown in nonbold, fixed-space font. | |
| [ ] | Brackets enclose optional portions of a command or directive line. | |
| ... | Ellipses indicate that a preceding element can be repeated. | |
| manpage(x) | Man page section identifiers appear in parentheses after man page names. |
If you have comments about the technical accuracy, content, or organization of this document, please tell us. Be sure to include the title and part number of the document with your comments. (Online, the document number is located in the front matter of the manual. In printed manuals, the document number can be found on the back cover.)
You can contact us in any of the following ways:
Send e-mail to the following address:
techpubs@sgi.com
Use the Feedback option on the Technical Publications Library World Wide Web page:
http://techpubs.sgi.com
Contact your customer service representative and ask that an incident be filed in the SGI incident tracking system.
Send mail to the following address:
Technical Publications
SGI
1600 Amphitheatre Pkwy.
Mountain View, California, 94043-1351Send a fax to the attention of “Technical Publications” at:
+1 650 932 0801
We value your comments and will respond to them promptly.