Color Plates
Prev   Next

Color Plates

This section includes all of the color plates referenced throughout the book.

Figure 2. Plate 1

Figure In-2 Plate 1

A scene showing the effects of directional lights. The scene contains blue and yellow directional lights; the building itself is white. (Images for Plates 1 through 21 by Paul Isaacs.)

Figure 3. Plate 2

Figure In-3 Plate 2

The same scene, using purple point lights.

Figure 4. Plate 3

Figure In-4 Plate 3

The same scene, using spotlights for a dramatic effect. Gray icons show the placement and orientation of the spotlights. See Chapter 4.

Figure 5. Plate 4

Figure In-5 Plate 4

Scene rendered with a lighting model of BASE_COLOR.

Figure 6. Plate 5

Figure In-6 Plate 5

The same scene, with the lighting model changed to PHONG. See Chapter 5.

Figure 7. Plate 6

Figure In-7 Plate 6

Scene showing the effects of an SoEnvironment node. The fog type is FOG, and the fog color is lavender. See Chapter 5.

Figure 8. Plate 7

Figure In-8 Plate 7

An indexed face set using per-face material binding.

Figure 9. Plate 8

Figure In-9 Plate 8

The same face set using per-vertex-indexed material binding.

Figure 10. Plate 9

Figure In-10 Plate 9

The same face set using per-face-indexed material binding. See Chapter 5.

Figure 11. Plate 10

Figure In-11 Plate 10

Scene using nontextured surfaces, a white point light in the foreground, and orange point lights in the background.

Figure 12. Plate 11

Figure In-12 Plate 11

The same scene, with textures added using a MODULATE texture model.

Figure 13. Plate 12

Figure In-13 Plate 12

The same scene, using a DECAL texture model.

Figure 14. Plate 13

Figure In-14 Plate 13

The same scene, using a BLEND texture model with a gold blend color to achieve a filigree effect. See Chapter 7.

Figure 15. Plate 14

Figure In-15 Plate 14

Texture mapping using SoTextureCoordinatePlane. The textured square at left (with arrows) is projected onto four different shapes.

Figure 16. Plate 15

Figure In-16 Plate 15

Texture mapping using SoTextureCoordinateSphere. The textured sphere at right (with arrows) is projected onto four different shapes.

Figure 17. Plate 16

Figure In-17 Plate 16

Texture mapping using SoTextureCoordinateEnvironment.

Figure 18. Plate 17

Figure In-18 Plate 17

Scene using a variety of texture coordinate function nodes. See Chapter 7.

Figure 19. Plate 18

Figure In-19 Plate 18

Scene using BLEND trans- parency type. The order of rendering is background, sphere, cone, black and gold buildings.

Figure 20. Plate 19

Figure In-20 Plate 19

Scene using DELAYED_BLEND transparency type. Order of rendering is opaque objects (background, black and gold buildings), then transparent objects (sphere, cone).

Figure 21. Plate 20

Figure In-21 Plate 20

Scene using SORTED_OBJECT_BLEND transparency type. Order of rendering is opaque objects (background, black and gold buildings), then transparent objects, sorted from back to front (cone, sphere). See Chapter 9.

Figure 22. Plate 21

Figure In-22 Plate 21

Noodle, an object modeler. The user specifies a cross-section, spline, profile, and twist for each object. The gold airplane is made of Inventor NURBS surfaces. The purple airplane is made of face sets using the same data.

Figure 23. Plate 22

Figure In-23 Plate 22

Movieola®, a modeling and animation system based on Inventor. This application makes extensive use of Inventor's 3D manipulators, components, and node kits to provide intuitive tools for creating complex shapes. (© 1993 Radiance Software International.)

Figure 24. Plate 23

Figure In-24 Plate 23

Showcase, an application for creating multimedia presentations. All 3D support, including rendering, interaction, and editing, is provided by Inventor. (Image by Rikk Carey.)

Figure 25. Plate 24

Figure In-25 Plate 24

Textomatic, a simple Inventor application used for interactively defining profiles and materials for 3D text. (Image by Catherine Madonia.)

Figure 26. Plate 25

Figure In-26 Plate 25

A hydrodynamics simulation created in Explorer, an application used for visualizing data. Inventor is used for the 3D rendering module. (Data courtesy of Drew Whitehouse and Gustav Meglicki, Australian National University Supercomputer Facility. Image by Roy Hashimoto.)

Figure 27. Plate 26

Figure In-27 Plate 26

Five map layers showing the Mahantango Creek USDA Watershed in Pennsylvania. The layers show direction of steepest descent, slope, rainfall, soil saturation, and soil category. (Data courtesy of Dominique Thongs, Department of Civil Engineering; image courtesy of Interactive Computer Graphics Laboratory, Princeton University.)

Figure 28. Plate 27

Figure In-28 Plate 27

A multimedia repair manual and inventory database. The user can move the displayed object, zoom in on selected parts, view demonstration videos, and listen to voice annotations. (Image by Kevin Goldsmith.)

Figure 29. Plate 28

Figure In-29 Plate 28

An application displaying radar coverage and status in 3D. Two new shape classes are used: a dome shape representing movable antenna radars and a pie shape representing phased-array radars. (Image courtesy of Decision-Science Applications, Inc.)

Figure 30. Plate 29

Figure In-30 Plate 29

The Piero Project, an application for teaching art history using interactive 3D computer graphics. This image shows a reconstruction of the Church of San Francesco in Arezzo, Italy. Clicking on the pink box brings up the higher resolution image shown at right. Clicking on a white sphere allows the user to view the scene from that position. White spheres can be connected to create an animated tour of the church. (Image courtesy of Interactive Computer Graphics Laboratory, Princeton University, and The Piero Project by Kirk Alexander, Kevin Perry, and Marilyn Aronberg Lavin.)

Figure 31. Plate 30

Figure In-31 Plate 30

An interactive art gallery tour. (Image by Gavin Bell and Kevin Goldsmith.)

Figure 32. Plate 31

Figure In-32 Plate 31

Trenchmaster, an archaeological application. The main window contains shapes representing artifacts found in an excavation trench. Clicking on a shape brings up additional windows with text and photos. (Data courtesy of William Childs, Dept. of Art and Archaeology; image courtesy of Interactive Computer Graphics Laboratory, Princeton Univ.)

Figure 33. Plate 32

Figure In-33 Plate 32

A reconstruction of early Islamic Jerusalem. The user can explore the city streets and then walk through the buildings. (Data for Plates 32 and 33 courtesy of Mohamed Alasad and Oleg Grabar, Institute for Advanced Study, Princeton, New Jersey.)

Figure 34. Plate 33

Figure In-34 Plate 33

View inside a mosque, one of the buildings shown in Plate 32. (Images for Plates 32 and 33 courtesy of Interactive Computer Graphics Laboratory, Princeton Univ.)

Figure 35. Plate 34

Figure In-35 Plate 34

Cuckoo clock. An engine connected to the real-time global field moves the hands of the clock. (Image by Rikk Carey.)

Figure 36. Plate 35

Figure In-36 Plate 35

Tetris. A timer sensor animates the falling pieces. (Image by David Immel.)

Figure 37. Plate 36

Figure In-37 Plate 36

Moxy Moto, a computer-generated character created using Alive, a real-time character animation program based on Inventor. (Moxy was created by (Colossal) Pictures and by the Cartoon Network. Alive is a product of deGraf/Associates.)

Figure 38. Plate 37

Figure In-38 Plate 37

Scenes from the Out-of-Box Experience, an immersive multimedia presentation. This application adds multimedia nodes to the toolkit and the ability to synchronize Inventor objects with them. Clicking on one of the moving spheres sends the user to a new “room.”

Figure 39. Plate 38

Figure In-39 Plate 38

The Animations Room. Each animated object is surrounded by an invisible Inventor shape. When the user clicks on an object, a movie is played.

Figure 40. Plate 39

Figure In-40 Plate 39

A live video window within the Stop-Motion Room. The control panel and background are built with Inventor objects.

Figure 41. Plate 40

Figure In-41 Plate 40

The Earth Room. The user controls the spinning of the earth within its painted galaxy. When the user clicks on a pin on the globe, a video or audio clip for that geographical area is played. (Images by Kevin Goldsmith and (Colossal) Pictures.)

Prev Table of Contents Next
About This Book  Chapter 1. Overview