List of Tables

| Table of Contents | List of Figures | List of Tables |

Table 1-1. Configuration Tasks That Must Be Done for Each ATM-OC3c Board

Table 1-2. Configuration Tasks That Must Be Done for Each ATM Network Interface Servicing IP if atmarp Is Not Running

Table 1-3. Default Transmission Rates on ATM-OC3c HIO Board's Queues

Table 2-1. Summary of ATM PVC ioctl() Calls

Table 2-2. IRIS ATM Local Hardware Address: atm_laddr_t

Table 2-3. Recommended Values for Arguments of the ATMIOC_CREATEPVC Command

Table 2-4. Supported Values for Traffic Parameters of ATMIOC_CREATEPVC

Table 2-5. Recommended Values for Arguments of the ATMIOC_DELARP Command

Table 2-6. Recommended Values for Arguments of the ATMIOC_GETARP Command

Table 2-7. Recommended Values for Arguments of the ATMIOC_GETARPTAB Command

Table 2-8. Values Retrieved by the ATMIOC_GETARPTAB Command

Table 2-9. Flags Retrieved by the ATMIOC_GETARPTAB Command

Table 2-10. Recommended Values for Arguments of the ATMIOC_GETVCTAB Command

Table 2-11. Values Retrieved by the ATMIOC_GETVCCTABLEINFO Command

Table 2-12. Recommended Values for Arguments of the ATMIOC_GETVCTAB Command

Table 2-13. Values Retrieved by the ATMIOC_GETVCTAB Command

Table 2-14. Recommended Values for Arguments of the ATMIOC_SETARP Command

Table 3-1. Summary of SVC ioctl() calls

Table 3-2. The atm_address_t structure

Table 3-3. Contents for fields of ATM NSAP

Table 3-4. Values for cellrate Type

Table 3-5. The cellrate_t structure

Table 3-6. The reject_reason_t structure

Table 3-7. Values for location Field in the reject_reason_t Structure

Table 3-8. Values for QoS Variables

Table 3-9. Values for BLLI Variable

Table 3-10. Values for BearerClass Variables

Table 3-11. Recommended Values for the Argument of the ATMIOC_ACCEPT Command

Table 3-12. Recommended Values for the Argument of the ATMIOC_ADDPARTY Command

Table 3-13. Recommended Values for the Argument of the ATMIOC_DROPPARTY Command

Table 3-14. Recommended Values for the Argument of the ATMIOC_GETVCCTABLEINFO Command

Table 3-15. Values Retrieved by the ATMIOC_GETVCCTABLEINFO Command

Table 3-16. Values Retrieved by the ATMIOC_LISTEN Command

Table 3-17. Recommended Values for the Argument of the ATMIOC_MPSETUP Command

Table 3-18. Recommended Values for the Argument of the ATMIOC_REGISTER Command

Table 3-19. Recommended Values for the Argument of the ATMIOC_REJECT Command

Table 3-20. Recommended Values for the Argument of the ATMIOC_SETUP Command

Table 4-1. Summary of ILMI ioctl() Commands

Table 4-2. Values Retrieved by the ATMIOC_GETATMADDR Command

Table 4-3. Values Retrieved by the ATMIOC_GETATMLAYERINFO Command

Table 4-4. Values Retrieved by the ATMIOC_GETMIBSTATS Command

Table 4-5. Values Retrieved by the ATMIOC_GETPORTINFO Command

Table 4-6. Recommended Values for the Argument of the ATMIOC_GETVCCTABLEINFO Command

Table 4-7. Values Retrieved by the ATMIOC_GETVCCTABLEINFO Command

Table 4-8. Cellrate Values

Table 4-9. Recommended Values for the Argument of the ATMIOC_SETATMADDR Command

Table 5-1. Summary of Hardware Calls for the IRIS ATM-OC3c HIO Mezzanine Board

Table 5-2. Summary of Hardware Calls for the IRIS ATM-OC3c 4Port XIO Board

Table 5-3. Values for the Argument of the ATMIOC_CONTROL Command

Table 5-4. Values Retrieved by ATMIOC_GETCONF for the HIO Mezzanine Board

Table 5-5. Values Retrieved by ATMIOC_GETCONF for an XIO Port

Table 5-6. Capability Flags for atm_conf_t

Table 5-7. Values Retrieved by the ATMIOC_GETIOSTAT Command

Table 5-8. Recommended Values for the Argument of the ATMIOC_GETRATEQ Command

Table 5-9. Rate Queue Identification Values

Table 5-10. Values Retrieved by the ATMIOC_GETSTAT Command

Table 5-11. Bits in SONET_status Field

Table 5-12. Recommended Values for the Argument of the ATMIOC_SETCONF Command for the HIO Board

Table 5-13. Recommended Values for the Argument of the ATMIOC_SETCONF Command for an XIO Port

Table 5-14. Recommended Values for the Argument of the ATMIOC_SETOPT Command

Table 5-15. ATM-OC3c Hardware Options

Table 5-16. Recommended Values for the Argument of the ATMIOC_SETRATEQ Command

Table 5-17. Rate Queue Identification Numbers

Table A-1. Rates Available for Rate Queues on the ATM-OC3c HIO Board

Table B-1. Binary Values for IA5 Characters

Table C-1. ATM UNI Cause Codes

Table C-2. Silicon Graphics Cause Codes

Table C-3. ATM UNI Diagnostics

Table C-4. Diagnostics for Unallocated/Unassigned Number

Table C-5. Diagnostics for Call Rejected