Digital Media Connections

Document Number: 007-3525-003

CONTRIBUTORS

Written by Carolyn Curtis

Illustrated by Cheri Brown, Carolyn Curtis, and Kirk Knapp

Production by Carlos Miqueo

Engineering contributions by Kirk Knapp, Frank Bernard, William Warner, Reed Lawson, Robert Marinelli, and Joe Wang

© 1997-1999, Silicon Graphics, Inc.— All Rights Reserved

The contents of this document may not be copied or duplicated in any form, in whole or in part, without the prior written permission of Silicon Graphics, Inc.

LIMITED AND RESTRICTED RIGHTS LEGEND

Use, duplication, or disclosure by the Government is subject to restrictions as set forth in the Rights in Data clause at FAR 52.227-14 and/or in similar or successor clauses in the FAR, or in the DOD, DOE or NASA FAR Supplements. Unpublished rights reserved under the Copyright Laws of the United States. Contractor/manufacturer is Silicon Graphics, Inc., 1600 Amphitheatre Pkwy., Mountain View, CA 94043-1351.

THE FOLLOWING INFORMATION APPLIES ONLY TO THE SILICON GRAPHICS DIVO AND DIVO-DVC OPTION BOARDS.

FCC Warning

This equipment has been tested and found compliant with the limits for a Class A digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Attention

This product requires the use of external shielded cables in order to maintain compliance pursuant to Part 15 of the FCC Rules.

European Union Statement

This device complies with the European Directives listed on the “Declaration of Conformity” which is included with each product. The CE mark insignia displayed on the device is an indication of conformity to the aforementioned European requirements.

International Special Committee on Radio Interference (CISPR)

This equipment has been tested to and is in compliance with the Class A limits per CISPR publication 22.

Canadian Department of Communications Statement

This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of Communications.

Attention

Cet appareil numérique n'émet pas de perturbations radioélectriques dépassant les normes applicables aux appareils numériques de Classe A préscrites dans le Règlement sur les interferences radioélectriques etabli par le Ministère des Communications du Canada.

Japanese Compliance Statement


Compliance Statement in Chinese

Silicon Graphics, the Silicon Graphics logo, and Onyx are registered trademarks, and Origin and Origin2000 are trademarks of Silicon Graphics, Inc.
ADAT is a registered trademark of Alesis Corporation.
Sony and Betacam are registered trademarks of Sony Corporation.
UFC-24/8 is a registered trademark of Otari Corporation.
C-Bridge DEC and D-Bridge 122 are trademarks of Accom, Inc.
Translator Plus and ADDA-2218 are trademarks of Euphonix, Inc.
Philips is a registered trademark of Philips Electronics, N.V. D19
MultiDAC and D19 MicAD are trademarks of Studer Professional Audio AG.